Enable snmp for the Speedtouch Thompson 780
September 14th, 2011
No comments
To enable snmp you have to use telnet to connect to the speedtouch router.
telnet x.x.x.x
After this type in the following commands:
service system modify name=SNMP_AGENT state=enabled
to check if it is really enabled type:
service system list
Default the community string is public. If you want to change it to your own one type the following cli:
snmp community add securityname=ROCommunity communityname=<community>
If you have a Linux System you can also check if it’s working. Go to your bash shell and type the following command:
snmpwalk -m ALL -v1 -c <communitystring> <ip address router>
Categories: Tutorials